Trips are usually caused by taking shortcuts, poor lighting, clutter in work areas, and loose footing. They often happen when you're in a rush. You can prevent trips by thinking about where you are and where you're going.
Watch for hazards
-
Shortcuts. The more shortcuts you take, the greater the chance of tripping. Going off a walkway and cutting through a lawn or driveway to save time may cause you to trip. Carrying a load too big to see over and rushing are also common causes of trips.
-
Lighting and clutter hazards. You need correct lighting to keep your balance and see ahead. Common lighting and clutter hazards include leaving the lights off and forgetting to replace burned-out bulbs. Leaving tools, boxes, or other items loose in your work area increases your chances of tripping over something.
Don't take shortcuts
The time a shortcut may save isn't worth an injury. To safely complete your tasks:
-
Take the path provided for walkers.
-
Make sure you can see where you're going.
-
Carry only loads that you can see over.
-
Slow down.
Keep work areas well-lit and clean
Your eyes can be your best tool against possible hazards. Be sure to:
-
Turn on the lights every time you enter a room.
-
Replace light bulbs when they burn out.
-
Replace damaged fixtures and cords.
-
Keep all work areas and walkways well-lit, clear, and uncluttered.
-
If electrical cords are used on a regular basis, install outlets so that cords do not cross walkways. Cover wires and cables that cross walkways